E6000 Spray Adhesive

E6000 Spray Adhesive is a permanent, multi-purpose latex-based adhesive without the toxic smells, fumes or unhealthy side effects. It is strong, flexible, water-resistant, resists bleed-through and yellowing. Ideal for a many substrates such as paper, wood, cardboard, photos, medium to heavy weight fabrics, glass, metals and more.The easy-to-use pump sprays a fine, even mist that is solvent and propellant free.

• Low odor 
• Easy water clean-up
• Non-flammable 
• Water resistant
• Latex formula contains no VOCs, harsh chemicals or propellants 
• Photo safe 
• Dries translucent 
• Indoor/Outdoor

• INSTRUCTIONS

  Follow these step-by-step directions when using E6000 Spray Adhesive:

  1. Read all directions before using.
  2. Shake vigorously before use.
  3. Protect surrounding area from overspray.
  4. Point spray tip away from face.
  5. Hold bottle 8-10 inches away from surface.
  6. PAPER, PHOTOS, CARDBOARD & FOIL: Spray a thin, light coat to one surface. Join materials and continue to apply pressure periodically making sure to secure corners. Allow to dry 1-3 minutes.
  7. POROUS MATERIALS (including foams and Styrofoam: Spray a heavy coat to both surfaces to be joined. Mate surfaces together. Allow to dry.*
  8. NON-POROUS MATERIALS: Spray a light coat to one surface. Mate surfaces together. Allow to dry.*
  9. IMPORTANT – CLEAN AFTER EACH USE: To prevent clogging, remove and rinse nozzle/straw. Pump warm tap water through sprayer until all adhesive is cleared out. Then dry, replace in the bottle, secure cap. *Maximum strength may not be reached for 1-5 hours. Styrofoam may require an overnight cure.