Skip to product information
1 of 2

Amazing GOOP

Amazing GOOP Marine

Amazing GOOP Marine

Regular price $21.50
Regular price Sale price $21.50
Sale Sold out
Tax included. Shipping calculated at checkout.
Size

NEW STOCK just arrived 22/12/23

Amazing GOOP Marine has the same toughness, strength and versatility as our other GOOP products but is specially formulated to be UV resistant. It's perfect for outdoor applications on items that will be exposed to sunlight, water or extreme temperatures. Easily bonds to vinyl, rubber, metal, glass, wood and more! 

Good for wader repairs 

  • Strongest, most versatile adhesive available 
  • UV resistant – resists yellowing and cracking 
  • Paintable once cured 
  • Use indoors or out 
  • Temperature resistant – remains flexible, even in extreme temperatures 
  • Dries clear 
  • Abrasion resistant – great for bonding items subject to vibration 
  • Waterproof – bond remains secure even when exposed to water 

  • INSTRUCTIONS FOR SAFE USE

    Follow these step-by-step directions when using Amazing GOOP Marine: 

    Read directions and test small area before use. 
    1. Surface should be clean, dry, and free from dirt. For best results, roughen surface before use. 
    2. Puncture seal in neck of tube using pointer cap. Product can be used between 50 and 90 °F (10 and 32 °C). However, fully cured adhesive can withstand temperatures from -40 to 180 °F (-40 to 82 °C) intermittently.
    3. Apply directly to each surface to be bonded or repaired. Allow to partially cure approximately 2 minutes before mating surfaces. Hardens by solvent evaporation and forms an immediate bond that is difficult to reposition after both adhesive-coated surfaces are placed in contact with each other and sufficient pressure is exerted to establish full contact. 
    4. Allow repair to cure for 24 hours. Depending on materials and temperature, maximum strength may not be reached for 48 to 72 hours. 
    5. For future easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap. 
    6. Clean uncured adhesive with acetone or citrus-based solvents. Cured material may be removed by cutting or scraping. 

View full details